Q. Zhu, L. Pileggi and F. Franchetti, “Smart Memory Synthesis for Energy-Efficient Computed Tomography Reconstruction”, Proceedings of the SRC Techcon Conference, September 2012.
Q. Zhu, K. Vaidyanathan, O. Shacham, M. Horowitz, L. Pileggi and F. Franchetti, “Design Automation Framework for Application-Specific Logic-in-Memory Blocks”, IEEE International Conference on Application-specific Systems, Architectures and Processors, July 2012.
B. Sadhu, M.A. Ferriss, J-O. Plouchart, A.S. Natarajan, A.V. Rylyakov, A. Valdes-Garcia, B.D. Parker, S. Reynolds, A. Babakhani, S. Yaldiz, L. Pileggi, R. Harjani, J. Tierno and D. Friedman, “A 21.8-27.5GHz PLL in 32nm SOI Using Gm Linearization to Achieve -130dBc/Hz Phase Noise at 10MHz Offset from a 22GHz Carrier”, 2012 Radio Frequency Integrated Circuits Symposium, June 2012.
D. Morris, D. Bromberg, J. Zhu and L. Pileggi, “Magnetic Logic Circuits with Minimal Connections to CMOS”, IEEE CAS-FEST, 2012.
D. Morris, D. Bromberg, J. Zhu and L. Pileggi, “mLogic: Ultra-Low Voltage Non-Volatile Logic Circuits Using STT-MTJ Devices”, IEEE/ACM Design Automation Conference (DAC), 2012.
D. Morris, D. Bromberg, J. Zhu, and L. Pileggi, “Spintronic Circuits and Devices for Low-Voltage Electronics”, (Invited Paper) In Proceedings of WOFE, 2011.
Q. Zhu, L. Pileggi , F. Franchetti, “Cost-Effective Smart Memory Implementation for Parallel Backprojection in Computed Tomography”, VLSI-SoC, October 2012.
F. Wang, G. Keskin, A. Phelps, J. Rotner, X. Li, G. Fedder, T. Mukherjee and L. Pileggi, “Statistical Design and Optimization for Adaptive Post-Silicon Tuning of MEMS Filters”, IEEE/ACM Design Automation Conference (DAC), 2012.
D. Bromberg, D. Morris, L. Pileggi and J. Zhu, “Novel STT-MTJ device enabling all-metallic logic circuits”, International Magnetics Conference, May 2012.
K. Vaidyanathan, S.H. NG, D. Morris, N. Lafferty, L. Liebmann, W. Huang, K. Lai, L. Pileggi, A.J. Strojwas, “Design and Manufacturability Tradeoffs in Unidirectional & Bidirectional Standard Cell Images in 14 nm”, SPIE Advanced Lithography Conference, February 2012.
Carnegie Mellon University
Hamerschlag Hall, 2113
5000 Forbes Avenue
Pittsburgh, PA 15213-3891 USA
pileggi@andrew.cmu.edu
Phone: 412-268-6774