Microsystem Engineering for Life
  •            
  • p_01
  • p_06
  • p_12

Journal Papers (in reverse chronological order)

1. T. D. Y. Kozai, Z. Gugel, X. Li, P. J. Gilgunn, R. Khilwani, O. B. Ozdoganlar, G. K. Fedder, D. J. Weber, X. T. Cui, "Chronic tissue response to carboxymethyl cellulose based dissolvable insertion needle for ultra-small neural probes," Biomaterials, v. 35, n. 34, Nov. 2014.

 

2. X. C. Ong, G. K. Fedder, P. J. Gilgunn, "Modulation of Parylene-C to silicon adhesion using HMDS priming," J. Micromech. Microeng., v. 24, n. 10, Sep. 2014.

 

3. P. J. Gilgunn, G. K. Fedder, "On the origin of selectivity and anisotropy loss during microstructure release etch," J. Micromech. Microeng., v. 20, n. 3, Mar. 2010.

 

4. P. J. Gilgunn, J. F. Alfaro, G. K. Fedder, "Model for aspect ratio dependent etch modulated processing," J. Vac. Sci. Technol. A, v. 28, n. 2, pp. 334 - 346, Mar. 2010.

 

5. P. J. Gilgunn, J. Liu, N. Sarkar, G. K. Fedder, "CMOS-MEMS lateral electrothermal actuators," J. Microelectromech. Syst., v. 17, n. 1, pp. 103 - 114, Feb. 2008.

 

PhD Dissertation

SOI-CMOS-MEMS Electrothermally Actuated Micromirror Arrays, Electrical and Computer Engineering Dept., Carnegie Mellon University, May 2010.

 

Conference Papers (in reverse chronological order)

1. P. J. Gilgunn, X. C. Ong, S. N. Flesher, A. B. Schwartz, R. A. Gaunt, "Structural Analysis of Explanted Microelectrode Arrays," in IEEE Neural Engineering Conference 2013, San Diego, CA, Nov. 6 - 8, 2013

 

2. W. F. H. Rakuman, X. C. Ong, H. S. Tetikol, R. Khilwani, X. T. Cui, O. B. Ozdoganlar, G. K. Fedder, P. J. Gilgunn, "Ultra-compliant neural probes are subject to fluid forces during dissolution of polymer delivery vehicles," in Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2013, Osaka, Japan, Jul. 2013.

 

3. T. D. Y. Kozai, P. J. Gilgunn, R. Khilwani, X. Li, O. B. Ozdoganlar, G. K. Fedder, D. J. Weber, X. T. Cui, "Biodissolvable delivery vehicle for ultra-small, ultra-compliant, ultra-structured neural probes," in Biomedical Engineering Society (BMES) Annual Meeting, BMES 2012, Atlanta, GA, Oct. 2012.

 

4. P. J. Gilgunn, "Mind over MEMS: How MEMS technology is coming to a neuron near you," in BioMEMS and Sensors 2012, Cleveland, OH, Mar. 2012.

 

5. P. J. Gilgunn, R. Khilwani, T. D. K. Kozai, D. J. Weber, X. T. Cui, G. Erdos, O. B. Ozdoganlar, G. K. Fedder, "An ultra-compliant, scalable neural probe with biodissolvable delivery vehicle," IEEE 25rd Int. Conf. MEMS, MEMS 2012, Paris, France, Jan. 2012, pp. 56 - 59.

 

6. P. J. Gilgunn, G. K. Fedder, "Scaling of folded electrothermal actuators," IEEE 23rd Int. Conf. MEMS, MEMS 2010, Wanchai, Hong Kong, Jan. 2010, pp. 1151 - 1154.

 

7. P. J. Gilgunn, G. K. Fedder, "Mechanisms of process-induced heating of MEMS structures during plasma release etch," IEEE 23rd Int. Conf. MEMS, MEMS 2010, Wanchai, Hong Kong, Jan. 2010, pp. 320 - 323.

 

8. P. J. Gilgunn, J. F. Alfaro, G. K. Fedder, "Aspect ratio dependent etch modulation for CMOS-MEMS applications," 2009 Int. Conf. Solid-State Sens. Act. Microsyst., Transducers 2009, Denver, CO, Jun. 2009, pp. 216 - 219.

 

9. P. J. Gilgunn, G. K. Fedder, "Flip-chip integrated SOI-CMOS-MEMS fabrication technology," Solid-State Sensors, Actuators and Microsystems Workshop,, Hilton Head, SC, Jun. 2008, pp. 10 - 13.

 

Symposia

1. P. J. Gilgunn, R. Khilwani, T. D. K. Kozai, D. J. Weber, X. T. Cui, G. Erdos, O. B. Ozdoganlar, G. K. Fedder, "Dissolution Dynamics of Ultra-compliant Neural Probe Delivery Vehicles ," in Microneedles 2012, Cork, Ireland, May 2012.

 

2. P. J. Gilgunn, C. Venditti, V. Morozov, P. Kelly, "Advanced process control implementation at Infineon Technologies Richmond," Sematech AEC/APC Symposium XV, Colorado Springs, CO, Sep. 2003.